CURT 55441 Vlastný 4-kolíkový káblový zväzok návesu na strane vozidla, pasuje na vybrané Nissan Frontier, Pathfinder, Xterra, Suzuki Equator

Brand:CURT

3.6/5

46.61

Vlastné káblové konektory CURT predstavujú najjednoduchší spôsob, ako vybaviť vaše vozidlo káblovým pripojením prívesu CURT. Sú vyrobené pomocou najmodernejších technológií v tomto odvetví a každý z nich je prispôsobený tak, aby fungoval s konkrétnou značkou a modelom. Niektorí výrobcovia automobilov inštalujú na vozidlo špeciálnu zásuvku, ktorá sa používa na zapojenie medzi vozidlom a prívesom. Aj keď táto špeciálna zásuvka nie je vybavená na každom vozidle, vlastný káblový konektor CURT – nazývaný aj T-konektor – využíva zásuvku na jednoduchú inštaláciu bez stresu. Namiesto toho, aby ste museli rezať, spájať a spájkovať do elektroinštalačného systému vášho vozidla, vlastný konektor elektroinštalácie používa jedinú zástrčku kompatibilnú s OEM a okamžite poskytuje štandardné, univerzálne prepojenie medzi vozidlom a prívesom, zvyčajne vo forme 4-cestnej plochý. Všetky káblové konektory CURT na mieru sú vyrobené špeciálne pre vozidlo pre čo najjednoduchšiu inštaláciu a čo najlepšie prispôsobenie. Tento konkrétny zásuvný konektor poskytuje 4-cestnú plochú zásuvku a je navrhnutý ako voliteľná možnosť zapojenia pre určité roky vozidiel Nissan Frontier, Pathfinder, Xterra a Suzuki Equator (vyžaduje sa továrenský ťažný balík; overenie kompatibility vozidla nájdete v aplikácii Info). Dodáva sa so všetkým potrebným hardvérom na vytvorenie pevného spojenia. Dodáva sa aj s protiprachovým krytom, ktorý udržuje zásuvku konektora čistú, keď sa nepoužíva. Aby bola zaistená dlhotrvajúca spoľahlivosť, všetky konektory vlastnej kabeláže CURT sú dôkladne testované na optimálnu funkčnosť. Stres je posledná vec, ktorú by ste mali pociťovať pri ťahaní prívesu – či už ťaháte svoj karavan do tejto obľúbenej kempingovej destinácie, svoje štvorkolky do lovísk alebo rybársky čln do nového skrytého hotspotu. V CURT si myslíme, že vaše ťažné zariadenie by malo prispieť k pôžitku z vášho zážitku, nie ho znížiť.

KRYT PROTI PRACHU. Na podporu dlhodobého používania a odolnosti voči poveternostným vplyvom je tento 4-pólový káblový zväzok na osvetlenie prívesu vybavený gumeným protiprachovým krytom. Keď sa nepoužíva, ľahko sa hodí na 4-cestný plochý konektor a chráni ho pred vonkajšími vplyvmi. JEDNODUCHÉ UCHOVÁVANIE. Zapojenie káblov prívesu a svetiel prívesu je jednoduché vďaka ergonomickému dizajnu tejto automobilovej zásuvky. Má výstupky na vrchnej a spodnej strane pre lepšie uchopenie pri pripájaní k prívesu alebo odpájaní. ŠPECIFICKÉ VOZIDLO. Tento popredajný káblový zväzok vozidla a prívesu je navrhnutý pre vybrané roky modelov Nissan Frontier, Pathfinder, Xterra a Suzuki Equator (vyžaduje sa továrenský balík ťažných zariadení). ŠTANDARDNÝ KONEKTOR. Táto zásuvná 4-plochá kabeláž prívesu môže byť použitá na pripojenie koncových svetiel prívesu, brzdových signálnych svetiel a smerových svetiel. 4-cestné zapojenie osvetlenia prívesu je obľúbené na širokej škále prívesov a pridáva všestranné možnosti ťahania vášho vozidla. JEDNODUCHÁ INŠTALÁCIA. Žiadne rezanie! Žiadne spájanie! Táto súprava káblového zväzku prívesu sa zapája do existujúcej továrenskej kabeláže na vašom vozidle a vybavuje ju štandardným zadným 4-kolíkovým káblovým konektorom prívesu na pripojenie a ťahanie prívesu. Typ montáže: Špecifické pre vozidlo.
Brand CURT
Brand ‎CURT
Customer Reviews 4.6 4.6 out of 5 stars 871 ratings 4.6 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 2 inches
Item model number ‎55441
Item Weight 0.37 Pounds
Item Weight ‎5.9 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55441
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55441
Product Dimensions ‎9 x 4 x 2 inches

3.6

13 Review
5 Star
77
4 Star
12
3 Star
6
2 Star
2
1 Star
3

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: John Reince
Works
As others mentioned doesnt get running lights. I cut the bown wite near the plug and stripped it back. Above the plug in is a bundle of wires.. the grey wire was my running lights.. spliced brown wire to that and all is working.
Scritto da: Taylor Flores
30 second installation with no real struggle!
Took 30 seconds to install on my 2015 Xterra Pro4x and that was because the connector cover was a bit of a struggle. Definitely recommend buying in conjunction with the curt 4 pin connector mount
Scritto da: Taylor1990
direct fit for 2016 frontier
Plug and play. The wire from the factory is on the frame behind the bumper. Plug and play.
Scritto da: Doug
As advertised
Easy install, good product.
Scritto da: Work smarter
It work’s
Easy fit
Scritto da: Cager
2022 Frontier
Worked great on my new Nissan Frontier. There's a plugged connector under the left (driver) side. Just remove the plug and insert the line cord into it. There's more than enough wiring so I just wrapped it around the hitch to take up the slack.
Scritto da: Kauai girl
Good product but you may need a bit more than just this to get your trailer hooked up with all lights working
Seems fine, but you might need http://www.amazon.com/gp/product/B006VN3GHY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1. I purchased this T-Connector and when I hooked up a new trailer to the connector that is already there from the factory (2012 Xterra), I got brake lights and turn signals but no running lights (the lights that come on the car and trailer when you turn on the headlights). After quite a bit of experimenting and research, I found that you need the "Tow Ready 118525 T-One Connector Assembly" to get those running lights to work. I will update if I find different, but this is my understanding at this point and will only change this if it proves to be false. The T-One assemble comes with some other connecters that need to be attached elsewhere on the vehicle to get that final function (running lights) to work. Pretty messed up in my opinion. If you have all the wiring running back there, why not have it all wired properly for the most common use, which is hooking up a trailer. Of course, that is Nissan and not Curt or their wires. Although I feel Curt should be letting people know in the descriptions of this product that it is most likely they need the other for their modern era Nissan's.
Scritto da: Dylan
Not a fake from this wish.com style site
It's a real part. Support your local business person instead though. It's worth the extra buck.
Scritto da: Jean-Marc Sabourin
Plug & play!
Easy to use plug & go on a 2019 Frontier. As was expected (From reviews) this wiring harness supplies flashers & brake lights to the trailer but the running lights will not work. Nissan omitted to include that in the factory plug on the truck side for whatever reason. Probably could just pig tail off the truck if you really want to have them working for night driving. 4 stars good product, manufacturer should disclose the part about it not being true plug & play though.
Scritto da: Jason
Buy it fast and easy to install
Fast delivery and easy to install
Scritto da: Sterling D. Lawson
It Works
It turns out it wasn't the wiring harness that was the problem. Nissan had a recall on the trailer lights years ago. The fix included installing a set of fuses under the dash above the accelerator pedal which they never informed anyone. The left side lights were not working because the newly installed left side fuse was blown.
Scritto da: Brad Fitzsimmons
Perfect fit
Plugged in and up and running in 5 minutes. Always used their product and they have never failed me.
Scritto da: Rob, Alberta
Perfect fit
Plug n play, easy install. Could have been a few inches longer though.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array