CURT 45090 Trieda 3 držiaka na ťažné zariadenie, vhodné pre 2-palcový prijímač, 5 000 libier, 1-palcový otvor, 8-palcový prepad, lesklý čierny práškový lak

Name: CURT 45090 Trieda 3 držiaka na ťažné zariadenie, vhodné pre 2-palcový prijímač, 5 000 libier, 1-palcový otvor, 8-palcový prepad, lesklý čierny práškový lak
Brand: CURT
SKU: 0612314409006
Price: 107.82 EUR
Availability: InStock

Brand:CURT

3.8/5

€
107.82

Guľové držiaky CURT triedy 3 alebo štandardné guľové držiaky sú o krok vyššie oproti triedam 1 a 2. Majú stopku 2 x 2 a majú vyššiu nosnosť na ťahanie ťažkých prívesov, vrátane úžitkových prívesov, prívesov na člny, karavanov, prívesy na prepravu dobytka s jedným koňom a väčšina prívesov pre rekreačné vozidlá. Keďže ťažné zariadenie triedy 3 je najbežnejším typom ťažného zariadenia pre pickupy a SUV, guľový držiak triedy 3 je v spojení s týmto ťažným zariadením vynikajúcim doplnkom k tomuto ťažnému zariadeniu a týmto väčším vozidlám (POZNÁMKA: Nikdy neprekračujte najnižšiu nosnosť akýkoľvek ťažný komponent; t. j. vozidlo, ťažné zariadenie, príves atď.). Tento konkrétny guľový držiak triedy 3 možno použiť v sklopenej polohe na zabezpečenie poklesu o 8 s celkovou hmotnosťou prívesu 5 000 libier. a nosnosť jazyka 500 libier. Dá sa tiež prevrátiť, aby sa zvýšila o 6, celková hmotnosť prívesu je 3 500 libier. a nosnosť jazyka 350 libier. Vyznačuje sa dĺžkou 11-1/2. Guľové držiaky triedy 3 sú tvarované CNC a roboticky zvárané, aby sa zabezpečila neochvejná presnosť a spoľahlivá pevnosť v každej jednotke. Každý z nich mechanicky odvápňujeme, aby sme zabezpečili hladký povrch pre dlhotrvajúci povrch. Tento guľový držiak triedy 3 je dodávaný s odolnou lesklou čiernou práškovou povrchovou úpravou, ktorá chráni pred koróziou, poškriabaním, UV žiarením a ďalšími, aby mu dodal hrubú kožu, ktorú potrebuje, aby mohol čeliť ceste pred vami.

Suma

Pridať do košíka Kúpte teraz

EAN: 0612314409006

Kategórie Automobilový priemysel, Príslušenstvo pre exteriér, Towingové produkty a navijaky, Spojky, Prijímače,

Zdvih: 6 palcov JEDNODUCHÁ INŠTALÁCIA. Ak chcete nainštalovať tento držiak guľového závesu triedy 3 na vaše vozidlo, jednoducho vložte driek do 2-palcového držiaka závesu vášho vozidla. Zaoblená stopka uľahčuje inštaláciu. Potom zaistite stopku na mieste pomocou čapu (predáva sa samostatne). ODOLNÉ KORÓZII. Pre dlhodobé používanie je toto guľové ťažné zariadenie chránené odolnou čiernou práškovou povrchovou úpravou, ktorá ľahko odoláva poškodeniu dažďom, špinou, snehom, cestnou soľou a inými korozívnymi hrozbami. PRIPRAVENÝ NA ŤAHOVANIE. Pripojenie prívesu je jednoduché s týmto 2-palcovým guľovým držiakom. Je vybavený 1-palcovým otvorom na prijatie gule ťažného zariadenia so stopkou s priemerom 1 palca (guľa prívesu sa predáva samostatne). VŠESTRANNÉ POUŽITIE. Tento guľový držiak na ťažné zariadenie sa dodáva s 2-palcovým x 2-palcovým driekom, ktorý sa hodí prakticky na akýkoľvek priemyselný štandardný 2-palcový prijímač. Guľový držiak má tiež 8-palcový pokles a 6-palcový vzostup na podporu ťahania v rovine. SPOĽAHLIVÁ SILA. Toto guľové ťažné zariadenie je skonštruované z vysokopevnostnej ocele a je dimenzované na ťahanie až 5 000 libier celkovej hmotnosti prívesu a 500 libier hmotnosti jazýčka v spustenej polohe (vzostupná poloha: 3 500 libier GTW, 350 libier TW).

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.8 4.8 out of 5 stars 792 ratings 4.8 out of 5 stars
Exterior	‎Painted
Finish Type	Gloss Black Powder Coat
Is Discontinued By Manufacturer	‎No
Item model number	‎45090
Item Weight	10 Pounds
Item Weight	‎10 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎45090
Material	Carbon Steel
Model	‎Class 3 Ball Mount
OEM Part Number	‎45090
Product Dimensions	‎16 x 9 x 3 inches
Vehicle Service Type	Pickup Trucks, Marine-Personal-Craft, Sport-Utility-Vehicles, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Tony T

Quality Hitch

Hitch seems very sturdy,works well on my Yukon

Scritto da: mike

Works great

Works great and the drop was perfect for my trailer

Scritto da: kindleuser

Using for Antenna Mount

Had to shim the hole for antenna bolt but works great. Sturdy with optional anti rattle clamp.

Scritto da: T-Bone

Solid

Solid hitch. Drop was just what I needed for hooking up my 1962 Airstream to a Subaru Accent. The height of the Subaru made the trailer pitch up. The 8" drop was just right. It is a bit longer than my old straight hitch so I needed to extend the safety chain. Definitely recommend it.

Scritto da: waltbobjr

Worked on My 2005 Sienna

Used on my 2005 Sienna with a Curt receiver. Top inside of my receiver was 10" above ground and I wanted the 6" rise to get up toward 17" total. There are no standards, but my goal was to use Home Depot trailers (and maybe U-Haul 4x8 Box trailer) and when I stopped at store I measured the trailers at about 17-18". Used with Curt 40004 ball and with the Curt 45007 sleeve as there are no indents or tabs on this mount to keep ball from rotating as it is tightened. The Curt 45007 tongue sleeve worked perfect (albeit pricy) and was able to install and remove balls with one wrench. There has been some reviews that expected Curt products to be made in USA. I can confirm that all the Curt products I bought: the 45090 mount, 40002/40004 ball, the 23590 anti-rattle kit, the 45007 sleeve, and the 20001 wrench are made overseas (mostly China). Black powder coat is nice, but is is chipped/scratched/damaged in many places as these mounts are not individually boxed. I fully expect it to start rusting immediately once exposed to elements. On the other hand, I don't leave it attached, but keep it in a hitch tote bag in the trunk. With 2" ball mounted I was just able to squeeze into the Classic Accessories 74877 Hitch Tote, but most definitely pushing the tote over the recommended limit. All that said, I was prepping for a future tow and I haven't confirmed that my choice of 6" rise is correct for the 2005 Sienna application.

Scritto da: HMD

Heavy steel

It is a heavy hitch that does a great job at hitching things.

Scritto da: Michael Haynes

Looks great, Works great

Powdercoated finish looks great. A little damaged in shipping but that’s to be expected with something this heavy. Has held up great so far

Scritto da: wook1

Perfect for my Highlander

CURT quality. Rock solid. Heavy (I usually hang my car and boat accessories but this just has to sit on my workbench when not in use. Not a problem). And, most importantly, it is the perfect fit (inverted as a rise) for my 2013 Highlander to connect my boat trailer. Add to that an equally solid hitch pin/cotter pin combo (Curt 21510 available here on Amazon) with rubberized coatings on the ends of each for grip and I'm a happy traveler. Highly recommend. Note: I had to try a couple to find the right rise because simple measurement isn't exact, since the car also sinks when you add the weight to it (and Highlanders have REALLY soft suspensions. Its SUV height/center of gravity on a Camry platform. I'm talking windshield wipers move the car when sitting still soft.) It may seem obvious but if you're a newbie to trailering like I was, be sure to test with your max load on the trailer to see how both car and trailer sit. Hope this helps.

Scritto da: gris

Yep... it' a hitch

Seemed like a decent enough hitch at a decent price. For some reason though there was quite a few notches in one side (lf) of the long steel bar that the ball bolts too. Looked like someone hit it a half dozen time with an ax, cold chisel, or other sharp object. Had to use a file to take the sharp edges off to prevent cutting hands or fingers when handling. So much for the anti-corrosive coating. LOL The hole for the ball was a bit off centre too. Other than those concerns, and the need to get new longer safety chains for my trailer, with the new 8 drop, tows fine and the trailer rides level.

Scritto da: randall fenn

Nice hitch

This product is very well-made and very strong

Scritto da: Random Dad

Fits my Dodge Caravan with slight modification.

The tube on this could be an inch longer. It rubs against my bumper. So I took an angle grinder and removed a small countoured bite out of the triangular reinforcing plate. Now it fits my 2015 Caravan nicely and does not contact the bodywork.

Scritto da: Yvon rocheleau

First class

First class

Scritto da: Guillaume Demers

Five Stars

Great car rear protection :) Haven't actually bought it to trail anything.