Brúsny papier JET pripravený na rezanie, zrnitosť 180 (60-9180)

Name: Brúsny papier JET pripravený na rezanie, zrnitosť 180 (60-9180)
Brand: Jet
SKU: 0696738209374
Price: 216.78 EUR
Availability: InStock

Brand:Jet

3.3/5

€
216.78

POPIS PRODUKTU Predznačené na rezanie. Žiadne spoje, švy alebo zlomy. Zásobte sa týmto brúsnym papierom schváleným výrobcom OEM, ktorý zaručene prinesie tie najlepšie výsledky. OD VÝROBCU Každý Ready-To-Cut(tm) obsahuje kotúč brúsneho materiálu, ktorý je vopred označený a farebne označený. Každá brúska Ready-To-Cut(tm) funguje s akoukoľvek brúskou Performax – jednoducho nájdite farbu, ktorá zodpovedá veľkosti vášho bubna, a režte pozdĺž čiary. S prípravkom Ready-To-Cut(tm) ušetríte čas a peniaze, pretože je zaručené, že nebude mať žiadne zlomy, žiadne spoje a žiadne švy, vždy len dokonale padnúce pásiky! Výdatnosť 19 obalov na 16 palcovom bubne; 12 na 25 palcov; 14 na 22-palcovom bubne a 8 obalov na 37-palcovom bubne.

Suma

Pridať do košíka Kúpte teraz

EAN: 0696738209374

Kategórie Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Nástroje a príslušenstvo pre dokončovacie práce, Dielce a príslušenstvo pre elektrické brúsky, Brúsne listy,

Záruka JET Red Assurance: Podporovaná špičkovou 90-dňovou zárukou spoločnosti JET. Kvalitná výroba: Hrdo vyrobené v USA. Vopred označené na rezanie: Dá 19 ovinutí na 16-palcovom bubne; 12 na 25-palcovom; 14 na 22-palcovom; a 8 na 37-palcovom. Jemné brúsivo: 180-zrnitý obal z oxidu hlinitého. Kompatibilita: Navrhnuté pre bubnové brúsky JET a Performax.

Backing Type	Cloth
Backing Type	‎Cloth
Batteries Required?	‎No
Brand	Jet
Brand	‎Jet
Color	Red
Color	‎Red
Compatible Devices	‎Drum Sander
Compatible Material	‎Wood
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 5 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Grit Material	‎Ceramic Alumina
Grit Number	‎180
Grit Type	Fine
Grit Type	‎Fine
Included Components	‎Ready-To-Cut Sandpaper
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎60-9180
Item Package Quantity	‎1
Item Weight	‎4.19 pounds
Manufacturer	‎Performax
Material	‎Aluminum Oxide
Part Number	‎60-9180
Product Dimensions	12"L x 12"W
Product Dimensions	‎11.6 x 12.2 x 4.2 inches
Product Dimensions	‎12"L x 12"W
Unit Count	‎1.0 Count
Warranty Description	‎90 Day

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Rojo

It works

It is sanding paper, it works, markings are accurate

Scritto da: J. Mikkelson

Effective, but burns on some woods

I couldn't believe that there were still no reviews on this item, which I have been using in my one-man shop for several years now on a Performax 16-32. Overall, it's a great option. Cutting is straightforward, using the color-coded lines for your particular drum, though I think there is a dark green line that can be easy to mistake for the black one, which is "my" line. The main problem I have with this is its tendency to develop "hot spots" -- especially on woods such as cherry, with its pitch pockets -- and then proceed to leave a burn line the length of the board as the burn problem snowballs. Once the paper burns, that's it for that spot. You can scrape/chip the burned resin off the drum, but I still mark the spot in pencil on my sander so I don't send something across that spot again. Since I do a lot of rail/stile kind of widths, I can get away with that, but if you were going to use it for lots of wide panels, it could be a different problem entirely. The only remedy I have found, and it's not 100%, is to take *extremely* light passes at a fairly high feed rate. In practice, the paper produces a near-finish quality on woods like mahogany and oak, which can hide finish imperfections fairly well. On maple, walnut, and cherry, particularly dense areas around knots, etc., it leaves very visible straight line scratches that take a good bit of RO sanding at 150-180-220, or a good cabinet scraper, to remove. (If you use a scraper after using this, I would hit the surface with RO at 180 or 220 briefly, and blow or vacuum off the dust, or the residual abrasives from this paper will dull the burr on your scraper in a hurry!) I still think this is a better solution than going to the RO sander straight from the planer, but it can be a board-to-board thing. A side benefit of this kind of abrasive is that, once I need to pull the old one off my sander, it is easy to tear the less worn sections into hand-held size pieces (I usually go about 5" long, and the roll is about 3.5" wide) and use for hand sanding, especially profiles, where the stiffness of the resin/fabric backing is a plus. You can generate some serious heat in a hurry this way, though, so go easy, or wrap your thumb / fingers -- it really is that hot. Overall, a good bet, and it will last you a long time. I'm just finishing my first roll after several years and many, many hundreds of BF through it.