BOSCH CO2139 3/16 palcov x 3-1/2 palca Kobaltový vrták

Name: BOSCH CO2139 3/16 palcov x 3-1/2 palca Kobaltový vrták
Brand: BOSCH
SKU: 000346333510
Price: 21.90 EUR
Availability: InStock

Brand:BOSCH

3.7/5

€
21.90

Šesťhranné matice sú najpoužívanejšie matice a budú fungovať pre väčšinu aplikácií. Majú štandardnú hrúbku a možno ich inštalovať pomocou kľúča alebo sady nástrčných kľúčov. Strojové skrutkové matice sú podskupinou hotových šesťhranných matíc navrhnutých na použitie so strojovými skrutkami, ktoré sú zvyčajne oveľa menšie ako skrutky.

Suma

Pridať do košíka Kúpte teraz

EAN: 000346333510

Kategórie Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Nástroje a príslušenstvo pre vŕtačky, Vrtačky Vrtáky, , Vrtačky s drážkou,

Najlepšie sa používa na vŕtanie do tenkého kovu, ocele s vysokým obsahom uhlíka, hliníka a zliatiny ocele, liatiny, nehrdzavejúcej ocele a titánu. Dostupné v dĺžke Jobber, celá stopka. Povrchovo tvrdené, aby preniklo do tvrdých abrazívnych materiálov. Pevný, hrubý webový dizajn dodáva bitu stabilitu v náročných aplikáciách. Odoláva vysokoteplotným aplikáciám po dlhú dobu (až do 1 100 stupňov F).

Assembled Diameter	‎0.19 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	BOSCH
Brand	‎BOSCH
Color	‎Metallic
Customer Reviews	4.7 4.7 out of 5 stars 767 ratings 4.7 out of 5 stars
Cutting Angle String	135 Degrees
Cutting Angle String	‎135 Degrees
Cutting Diameter	‎0.19 Inches
Included Components	‎Bosch CO2139 3/16 In. x 3-1/2 In. Cobalt Drill Bit
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	5.9 x 1.8 x 0.21 inches
Item Dimensions LxWxH	‎5.9 x 1.8 x 0.21 inches
Item model number	‎CO2139
Item Package Quantity	‎1
Item Weight	‎0.48 ounces
Manufacturer	‎Bosch
Material	Cobalt
Material	‎Cobalt
Measurement System	‎Inch
Part Number	‎CO2139
Product Dimensions	‎5.9 x 1.8 x 0.21 inches
Shank Type	3-Flat
Shank Type	‎3-Flat
Size	‎3/16-Inch
Surface Recommendation	‎Aluminum,Stainless Steel,Cast Iron,Metal,Steel

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Michael Day

Item was as seller advertised

Item was as seller advertised

Scritto da: Faron Rogers

It's a drill

I drilled made some pre existing holes in a toy slightly larger with this drill bit. Worked as needed

Scritto da: Curtis W. Jackson

The Drill Bit That Got Through

The 3/16 In. x 3-1/2 In. Cobalt Drill Bit produced by the Bosch company was used by me in a handheld drill. The circumstance sucks because my rechargeable drill died, unable to power up. It’s probably the battery needing replacement. Whatever handheld or electric driller, Bosch CO2139 product is unlikely to require replacement for a good, long time. It is an attractive metal piece which fitted well in my drill. The drill bit dug favorably into wood and plaster boards, I did not try metal surfaces or anything harder because of my hands predicaments. Nonetheless, I feel assured ordering other drill bits from Bosch.

Scritto da: Amazon Customer

Held up very well while drilling stainless steel.

Bought two of these in different sizes for drilling stainless steel. After thoroughly searching the web for advice on drilling stainless, I found one post that made sense to me. The author stated that when drilling stainless, it makes no sense to lubricate the drill bit with any type of oil or lubricant. The objective is to cut the stainless while keeping it and the bit from becoming too hot. Lubricants only cause slippage. So I stacked washers on the stainless surface I was drilling and kept them filled with water. The water cooled the stainless and kept it from hardening before being cut. Also made sure to drill slowly as higher speeds build the heat faster. Drilled dozens of holes in this manner and the bits held up. The Bosch bits outperformed the Century bits that I also purchased.

Scritto da: rodger ball

Just what I wanted

Great product

Scritto da: Amazon Customer

Kind of worked

I bought two of these bits to go through a piece of 1/4" leaf spring steel. The steel turned out to be especially hard in some places, so the bits only worked for a few holes. One of the bits chipped out a bit. They might be okay for some light duty applications, but I'm not sure I'd get them again. I was able to find USA bits around the same price with higher cobalt content, lifetime warranty, and no breakage.

Scritto da: RIP

Good Product

what I wanted and expected to receive

Scritto da: Karla

Flattened surfaces to fit the chuck

Nice bits, especially for the price. Added feature are the flattened surfaces so it doesn’t slip in the chuck.

Scritto da: Vadim

Five Stars

great