Anderson Metals - 56123-0806 Mosadzná armatúra, redukčná šesťhranná vsuvka, 1/2 samca x 3/8 samec 1/2 x 3/8 1

Brand:Anderson Metals

3.6/5

29.10

Potrubná armatúra Anderson Metals so šesťhrannou vsuvkou je vyrobená z mosadze a má vonkajšie závitové spoje National Pipe Taper (NPT). Táto redukčná šesťhranná vsuvka má jeden koniec menší ako druhý na spojenie dvoch závitových rúrok s rôznymi priemermi a má šesťhrannú hlavu pre zväčšenú dosadaciu plochu pri nastavovaní armatúry kľúčom. Má vonkajšie závity NPT na pripojenie k rúram s vnútorným závitom, čím vytvára tesnejšie tesnenie ako priame závity. Táto armatúra je vyrobená z mosadze pre odolnosť proti korózii, ťažnosť pri vysokých teplotách a nízku magnetickú permeabilitu. Mosadz môže byť spojená s meďou, mosadzou, plastom, hliníkom a zváranou oceľou. Prevádzkové teploty pre túto armatúru sa pohybujú od -53 do 121 stupňov C (-65 až 250 stupňov F). Táto armatúra spĺňa špecifikácie B16 Americkej spoločnosti pre testovanie a materiály (ASTM) B584 a Americkej spoločnosti strojných inžinierov (ASME)/Amerického národného inštitútu pre normy (ANSI) B16 na zabezpečenie kvality. Potrubné armatúry sú komponenty používané na pripojenie, ukončenie, riadenie prietoku a zmena smeru potrubia v mnohých rôznych priemyselných odvetviach. Pri nákupe potrubných tvaroviek zvážte použitie, pretože to ovplyvní typ materiálu, tvar, veľkosť a požadovanú trvanlivosť. Armatúry sú dostupné so závitom alebo bez závitu, v mnohých tvaroch, štýloch, veľkostiach a plánoch (hrúbka steny potrubia). Anderson Metals vyrába mosadzné fitingy, ventily a potrubné vsuvky. Spoločnosť založená v roku 1951 má sídlo v Kansas City, MO.

EAN: 0719852920380

Kategórie Priemysel a veda,

Tieto armatúry obsahujú olovo a federálny zákon ich nepovoľuje inštalovať na pitnú vodu v USA a na ich územiach. Poznámka: Pred objednaním si prosím pozrite tabuľku veľkostí rúr alebo závitov. Spĺňa špecifikácie ASTM B584 a ASME/ANSI B16 pre zabezpečenie kvality. Prevádzkové teploty sa pohybujú od -53 do 121 stupňov C (-65 až 250 stupňov F). Mosadz pre odolnosť proti korózii, ťažnosť pri vysokých teplotách a nízku magnetickú permeabilitu. Vonkajšie závity National Pipe Taper (NPT) na pripojenie k rúram s vnútorným závitom, Redukčná šesťhranná vsuvka na spojenie dvoch závitových rúr s rôznymi priemermi. Poznámka: Veľkosti potrubných tvaroviek sú založené na nominálnej veľkosti potrubia. Aby ste určili správnu potrebnú veľkosť, zmerajte vonkajší priemer závitu a vyberte veľkosť potrubia vyššie, aby sa zhodovala s vonkajším priemerom závitu. veľkosť v tabuľke veľkostí tvaroviek rúr.
Brand Anderson Metals
Color Brass
Connector Type Nipple
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 56123-0806
Item Weight 0.11 Pounds
Manufacturer Anderson Metals
Material Brass
Number of Pieces 1
Package Dimensions 3.58 x 2.36 x 1.46 inches; 1.76 Ounces
Size 1/2" x 3/8"
Thread Type Connecting to Female Threaded Pipes

3.6

13 Review
5 Star
75
4 Star
12
3 Star
6
2 Star
2
1 Star
6

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Wilson
EXACTLY WHAT I AM LOOKING FOR
This is exactly what I am looking for. Very satisfy.
Scritto da: Octavius
Perfect for Weber Grill or Ooni pizza oven
I got my Weber Genesis II grill setup the other day, then realized the quick connect it comes with is not ready to attach to my stub. God knows why they do this, but they send you a quick connect with 3/8 female NPT threads, when most homes have female 1/2. Why they don't ship it with a 1/2 male connection is a mystery. I remember 2 years ago when I bought my dad his grill that he had the same issue, but assumed at the time it was because their house was 40 years old and nonstandard. So anyway, I ordered this and some Teflon/PTFE tape for same day delivery, since weirdly no one in town stocks this connector. Make sure not to use the white stuff, it's way too thin and would require too many wraps to make a proper seal. Technically if you're following code, you'd need pink since it's spec for gas piping with 1/2" threads and over, but I'm sure yellow would be fine. The yellow stuff is cheaper at your local hardware store, but I just got my tape with the connector since it wasn't worth an extra trip (and no one in town stocked pink). Once I got it in and taped up both sets of threads, I screwed it tight into the Weber quick connect, then screwed the quick connect to my gas stub. After that I checked it for leaks with soapy water just to be safe and fired up my grill. It's much more compact that Webers suggested black iron pipe, and looks a lot cleaner too. I know this is an issue for the Genesis II grills, but I assume you'll need one for the new Genesis as well. My dad also got an Ooni natural gas pizza oven and faced the same situation, so if you have one of those you'll probably need this part as well.
Scritto da: Stephen
Good
Good
Scritto da: Blake3
Well made
Seemed like a well made part, although received wrong size
Scritto da: Amazon Customer
Good quality.
Got the job done, would recommend
Scritto da: Pam Kirkendall
Must have part for Weber Grill Natural Gas Hookup!!
Purchased a Weber Spirit II Natural Gas Grill. This part is essential to attach to the “quick release” hose that comes with the grill to then attach to the shutoff valve. DO NOT try to use a reducer that had a “flanged” end. It will NOT work.
Scritto da: Kennedy
Perfect fit for connecting my NG grill
Purchased this adapter to convert the 1/2” gas line connector from my house to the 3/8” gas line from my Weber Genesis grill. Easy to install and was a perfect fit. Tested the connections and no signs of leaking.
Scritto da: Kathy
Poorly machined
The 1/4” side is fine but the 3/8” side wasn’t fully machined so the threads won’t catch the female end I’m trying to connect. I’ve even used other 3/8” fitting to make sure it’s the correct size, and they all connect perfect. But this one just keeps turning and won’t catch.
Scritto da: L. Baydak
Machining defect.
There was a ridge line crossing all the threads on the 1/2" NPT part of the fitting. In the photo you can see a dark like running down the centre of the bright illuminated stripe. I suspect that it was a manufacturing defect (from a die maybe?). I can feel it catching my fingernail. Anyway. The fitting is scrap, since it would be near impossible to make a good seal, what with the sharp edge scoring and cutting holes and gaps in any thread tape or sealant I used.
Scritto da: Jabus
Not correct 3/8 size
3/8 sizing is incorrect
Scritto da: Amir G.
Great fit
Used this to connect my 1/2" gas supply line to a 3/8" quick connect adapter. Fits great and seems to be of good quality.
Scritto da: Amazon Customer
The size in the description is not correct
I went to the hardware store and got the correct fitting in five minutes. Some things are just better done in person.
Scritto da: Justine Milton
Works great!
I used this for my natural gas BBQ connection with some yellow pipe dope. I have been using it for many months and it has not developed any leaks or corroded outdoors. Very happy with the purchase!

Súvisiace produkty

hot
Kladka Goodyear Belts 57807 FEAD
0.1/5

€ 118.63

Kladka Goodyear Belts 57807 FEAD
0.1/5

€ 118.63

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array